iPhone Charging Port Repair Service
Charging problems are not always the battery. Worn pins, lint, a damaged charging flex or a power management fault can all stop a iphone charging properly. TechFix tests the port, cable path and board separately in Faisalabad so you only pay to replace the part that is actually at fault.
Signs you need this repair
- Cable has to be held at an angle to charge
- Charges only sometimes, or very slowly
- Port feels loose, or the cable falls out
- Device does not respond to any charger
What causes it
Lint compacted into the port is the single most common cause and needs no parts at all. Beyond that: worn pins, a damaged charging flex, or a power-management fault on the board.
What the repair involves
- 01Port cleaned and inspected under magnification first
- 02Charging tested against a known-good cable and adapter
- 03Current draw measured to separate a port fault from a board fault
- 04Port or flex replaced, then charge-cycle tested
What affects the price
Cleaning may cost nothing. A port replacement depends on whether it is a modular part or soldered to the board — soldered ports need microsoldering and take longer.
Before you bring it in
Bring the cable and adapter you normally use. Faulty cables are a common false alarm.
Free diagnosis
We find the fault before quoting
Fixed price
Agreed upfront, no surprises
Bench tested
Checked before it comes back
Get a free quote
Message us with your device model and what happened. We confirm the fault and the price before any work starts.